• 电话:0531-87199680
  • 传真:0531-87119680
  • 销售热线:400-685-1687
  • 地址:济南市104国道邵西
  • 润鑫工业园
新闻中心当前位置:首页-新闻中心
    母线加工机提高了工作效率

        母线加工机主要符合于上下压开关橱子、变压器制造行业,用于加工各种型号的铜、铝母线。用户只需在相应的加工单位上,即可分别停止母线的冲、剪、折加工,消费效率高。电器橱子定期肃清积尘,坚持清洁,可用吹气或擦除办法。随时留意并保证各衔接件的固定螺钉锁紧,各组件的衔接端子能否锁紧,以避免接触不良,产生误动作或毛病。确保电缆的弯曲度,以防电线折断。
    Busbar processing machine mainly correspond fluctuation pressure switch cabinet, transformer manufacturing industry, used for processing various types of copper, aluminum bus bar. On the corresponding processing units, users only need to stop the bus rushed, shears, folding processing, consumption of high efficiency. Electrical cabinets regularly clean up dust, insist on clean, usable blowing or erased. Always pay attention to and we can ensure the screw locking of the cohesion, cohesion of the items constituting the terminal can lock, in order to avoid poor contact, produce misoperation or problems. Ensure that the curvature of the cable to prevent wire broken.
    1、割开单位采用通用的双刀式割开,剪口平整,无毛刺。
    Cut unit adopts the general double pole type 1, cut, cut the mouth level off, without burr.
    2、冲孔单位采用搞精度五臂冲孔模架,延长了模具的运用寿命。使用视野愈加明晰, 母线加工机运用愈加便当快捷,无需改换模具消费效率明显高于传统冲孔单位。
    2, punching unit adopts precision punching die set five arms, extend the service life of the mold use. Using vision clearer, busbar processing machine use more quick lunch, don't need to change mould consumption efficiency is significantly higher than the traditional punching units.
    3、挂勾式敞开折弯工位 使用简双方便 可加工特殊回形 小折弯、压花、立弯等。
    3, open hook type bending location Both sides will use Jane Machinable special back into shape Small bending, embossing, bending, etc.
    4、折弯单位采用卧式加工,在加工时更平安便当。
    4, bending unit adopts horizontal machining, the machining more peace when lunch.
    5、机器的三个工作工位能够同时工作,互不影响,大大进步了工作效率。
    5, three of the machine working station can work at the same time, mutual influence, greatly improved work efficiency.
    6、每个加工单位的工作行程均可便当地调理,减少加工辅助时间、进步消费效率。
    6, each processing unit of the working stroke are local control, reduce the processing time, advance consumption efficiency.
    7、液压油箱采用厚钢板焊接,并作了磷化处置,使液压油长期运用不会蜕变。
    7, the hydraulic oil tank is made of thick steel plate welding, and the phosphating treatment, make the hydraulic oil used for a long time will not change.
    8、液压胶管采用国标A型衔接方式,即耐用而便当维修。
    8, hydraulic hose used gb type A cohesive ties, durable and lunch service.
    9、母线加工机器上将有脚轮,能够便当的挪动
    9 will be castor, busbar processing machine, move to lunch